-
Hello Rohit,
I'm using your code on my TM4C123GXL TIVA C series board and got the below prints on serial port.
_f_mount success!
f_open error_
What could be the problem ?
I've used TOSHIBA …
-
[TM4C12x](http://www.ti.com/lsds/ti/microcontrollers_16-bit_32-bit/c2000_performance/control_automation/tm4c12x/overview.page?DCMP=tm4c12x-series&HQS=tm4c12x) is a cortex-m4 processor. It can be used …
-
Hi,
This looks like an excellent project. I'd love to use your library to hook up my Adafruit TFT shield with my Redbearlab CC3200 (using the Energia IDE).
Do you have a rough sense when an Energia …
-
In the file: LIDARLite_Basics/TI_Tiva_C_Series/main.c
I2C addresses look inverted, Write should be 0xC4 and Read should be 0xC5
-
-
Hi,
these are my first steps with the Tiva™ C Series Connected Launchpad (EK-TM4C1294XL) and ARM generally. I can build the blinky example and flash it to the board and it works great. But I had prob…
-
Release 13 introduces pauses in the hardware serial communications for characters sent from my EX-TM4C1294XL Tiva C Series Connected Launchpad to my Mac desktop host application causing my app to gene…
-
Hello,
I've managed to get Ethernet working with Energia 0013 by applying the fix to Etherner.h and tested the UdpNtpClient but neither the ACTIVITY_LED and LINK_LED are working.
I've checked in pin…
-
Upgrading to release 13 I notice that my sketch code size expands about 30 kB for 77 kB to 107 kB.
I have not analyzed this further to determine what additional libraries are being drawn into my sketc…
-
Ok so i'm doing some testing with my hardware and I've been experiencing some barf of Grbl when I perform lots of small linear motions with higher accel decel rates. I have 120=600 110=1800
With the…