-
### What happened?
Occasionally, the port on my Zigbee dongle shuts down (one to 5times a day).
When this happens, restarting the service consistently causes Home Assistant to crash, resulting in …
-
###Solved for myself
after some times plug and unplug and changing the USB ports at one moment it works and I never touched it since and still works. I'm available for future tests.
### The problem
…
-
Hi,
I have nearly each day an discconnect of my CP2102 USB to UART Bridge Controller
In **journalctl** appears:
```
Dez 27 21:38:35 vcontrold kernel: cp210x ttyUSB0: usb_serial_generic_read_bu…
-
### What happened?
Updated to Ember a few weeks (or months ago). Since then I can't get my old Philips Iris to work again in my zigbee network. I have to pair them via Touchlink / Remote Control
###…
-
-
### What happened?
I changed my Dongle-E adapter to a SLZB-07. Steps in order:
- Update the firmware of the SLZB-07 with the flasher of SMLight to version 7.4.1
- Unplugged the Dongle-E an plugged…
-
Hi,
I am trying to connect a Silabs CP2102 USB to UART Bridge but I do not know how to use this library to connect and send/recieve data. Any minimal example or hints would be appreciated.
Tha…
-
### Description of the issue
The addon keeps on crashing and restarting. I think it's related to the latest upgrade, or a recent one, as the addon was stable for a long time before this.
For instanc…
-
```
The UART bridge mode might include an option for automatic baud detection
if the target device's baud rate is unknown.
When the baud rate is unknown the bus pirate can look at a few incoming
char…
-
```
The UART bridge mode might include an option for automatic baud detection
if the target device's baud rate is unknown.
When the baud rate is unknown the bus pirate can look at a few incoming
char…