-
I have a clean new installation of Raspbian Stretch and Craftbeerpi3.
After successfully installing the iSpindel plug-in and subsequent reset, I can configure Craftbeerpi3 with a new sensor for tempe…
-
Even though I discourage to use different messages for the publish operation and the subscribe operation, it's something people are doing so we have to support it. Example:
https://ubidots.com/docs…
-
Please can you assist me. I purchased PCB rev 4 Boards from PCBWay.
My Ispindel sends data to ubidots the first time and then wont wake up again to send data again.
I have read up comments regardi…
-
Hi,
I have the problem after a few days of fermenting the web server becomes unresponsive. It manifests itself after 2-3 days of normal operation. I can then after a power cycle of the BPL again acc…
-
Definir presentación de datos
-
Hi, I am trying to publish data of around 5KB size. I changed the MQTT_MAX_PACKET_SIZE to 5000, but it doesn't seem to work.
The maximum I have been able to send is 1342 bytes. It seems like an odd n…
-
> #### DRAFT
> _This is a draft proposal of a design change._
# Overview
While working on a Java façade for the `arduino-cli` application, I have struggled with identifying commonalities in th…
-
The warning designed to highlight when the sample frequency is too short sometimes appears even when the frequency is sufficiently long (e.g. sample every minute and average every ten minutes).
-
Running latest release, v3.6r3 and have come across some strange issues with the MQTT feature.
Since I have this exact issue on several units I can only assume this can be replicated by others as wel…
-
Graph load is slow, I think due to the 3 extra data points per log. Planning on removing the iSpindel battery level and possibly moving it to a fixed display rather than on the graph. Will likely le…