-
### The problem you're addressing (if any)
We were using Clonezilla Server (via iPXE) without any problems until this was no longer possible since Dasharo version v1.7.1 (NS5x-ADL). With both lates…
-
I'm using OpenZFS with a pool created inside a USB drive.
When trying to install Ubuntu 16.04 over a ZFS volume it seems that xhyve cannot read the block device. The Ubuntu installer just tells me t…
-
The manual prescribes this step:
> **Enable ISP for Linux in BIOS**
> When booting Bayley Bay target machine, the BIOS must be set with the right ISP PCI device. In the BIOS settings under "Uncore…
rmast updated
21 hours ago
-
Currently, on x64 systems, Ventoy is able to run when Secure Boot is enabled, through the use of MokManager to enroll the certificate with which Ventoy's EFI executable is signed.
However, because …
-
-
After flashing the MinnowBoard Turbot with Intel Firmware Engine 3.0 generated firmware, the board boots however I'm unable to flash new firmware with the error 'Spi Protocol is not found' given by th…
-
### Issue
The script `install.vbs` runs without error but the resulting USB drive is not bootable and shows RAW partition in Windows 10 64bit (up to date).
### Steps to reproduce
On a Windows 10 22…
-
**What I'd like:**
Currently, Bottlerocket images default to creating two volumes (as explained in the [README](https://github.com/bottlerocket-os/bottlerocket?tab=readme-ov-file#default-volume…
-
Is a power-edge of this generation desired? I suspect that power-edges with `idrac6` (is that related to the `bmc` component? I believe the BMC in this server is a combination of a bios style SOIC-8 f…
-
https://twitter.com/dominucco/status/1274785126958927873