-
Yet another Watchman oil tank monitor, with an apparently different format.
A few samples are at https://github.com/merbanan/rtl_433_tests/pull/440.
I have managed to decode these using URH foll…
-
Hi All
I'm looking for someone to help me to decode RISCO 868.64M OOK wireless alarm sensors.
It seems very simple, but I'm not able to identify the correct parameters for the decoder to have stable…
-
I was able to configure my WROVER-B device, have it register to Home Assistant and I have no problem receiving data according to the serial console, but for some reason it doesn't actually send anythi…
-
**What new integration would you wish to have?**
Would it be able to add RF Transceiver 868MHz CC1101?
*If possible, provide a link to an existing library for the integration:**
https://github.…
-
Hello,
I am doing some experiments with RF with a CC1101 module using an ESP8266 and RTL-SDR.
Using [the SmartRF L](https://github.com/LSatan/SmartRC-CC1101-Driver-Lib) I am able to send an arbitr…
-
I was able to properly flash the MCU with the latest passthrough firmware. This is my ESPHome config: https://pastebin.com/p22yFTiz
I can capture the original remote successfully, I think:
[13:34:…
-
Hi all,
Just wanted to raise the issue that the title of this group is very misleading since there is a well established DWeb movement that uses this term explicitly.
See:
- https://dci.mit.edu…
-
URH V2.9.6 version cannot load SDRPLAY on Windows 11
It cannot obtain device identifier
Forcing it to start causes an error with the image
![屏幕截图 2024-03-22 163420](https://github.com/jopohl/urh/…
xykts updated
7 months ago
-
**Describe the solution you'd like**
It would be extremely useful during security tests if the recorded signal could be edited on PortaPack. Although some basic editing options as it is, for example,…
-
Hello,
I am not a programmer. I am trying to install qspectrumanalyzer on a Windows 7 machine. I installed PothosSDR-2017.05.02-vc14-x64.exe and QSpectrumAnalyzer-2.2.0-win-x64.msi. These programs…