-
### Describe the bug
When downloading OpenWRT, with the m2 keyB module connected, the modem module is not detected over the usb interface bus, the firmware simply does not see it, I tried to downlo…
-
### Board
esp32s3
### Device Description
esp32s3 devkitc n8r8
### Hardware Configuration
Native USB port plugged into computer, serial convert USB port not plugged in.
### Version
…
-
Hello,
I have been looking into using ev3rt for Robotics competition I compete in. It is nice but there are still a few things that make it hard for me to adopt for the comp as I need to be able to m…
-
Hello,
1) Is it possible to use the USBX stack to expose two ACM-CDC under the same USB?
2) Is it necessary to register the ACM-CDC class twice under a composite device, or is there a way to show…
-
I have a fresh of install of nixos on my surface and tried to add the surface-pro-intel build to my system through the guidelines.
```
imports =
[ # Include the results of the hardware scan.…
-
blisp throws a "device not found" error while trying to flash a Pinecil V2. On the Pinecil docs, it's stated that the device will appear as a `/dev/ttyACM*` device, but this does not occur on my machi…
-
Before I waste my time issuing a PR: is there any interest in an CDC-NCM driver for Zephyr? As far as I understand #42066 it should be.
Some time ago I made a bigger rewrite of the NCM driver for …
rgrr updated
2 months ago
-
The cmakefiles refer to a file named `class/cdc/usbh_cdc_ecm.c`
https://github.com/bouffalolab/bouffalo_sdk/blob/0f07c3b8ecbed6b5eda90cc794611c6dd9077851/components/usb/cherryusb/CMakeLists.txt#L59…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
cloning [FlipperZero CLI](https://docs.flipper.net/development/cli#0Z9fs), allow to quickly send cmds over serial.
e.g.
````
ir tx NEC 04000000 08000000
````
Currently WIP in [my forked repo]…