-
As you know, to update to new firmware it is necessary to go into BOOTSEL mode. Typically this is done by pressing the BOOTSEL button, but that can be tricky for cased PCBs.
I wonder if you would c…
-
I encountered an issue with this driver upon installation. It disabled all USB ports on my Windows 11 system. Attempting to resolve the problem in safe mode proved unsuccessful, as USB functionality r…
-
I bought some USB-A + USB-C drive from a discount store that sells random junk including scam flash drives. It said SanDisk on it so I took a chance, even though I knew scammers can print the name of …
-
### Describe the bug
When we try to write data on the external usb disk the block device reset like below. sync parameter extend life of the device but reduce write performance to 20MB/s . Reads ar…
-
So, as son as I run Discord Flatpak, my `dmesg` log gets flooded with `usb 3-2: reset high-speed USB device number 3 using xhci_hcd` (confirmed, that USB device is indeed the webcam). It doesn't happe…
-
# Problem Description
I want to use the built-in USB serial functionality comes with the ESP32-S3 SoC in addition to the UART interface (not simultaneously). However, I found that the firmwares (both…
-
### Board
esp32s3
### Device Description
esp32s3 devkitc n8r8
### Hardware Configuration
Native USB port plugged into computer, serial convert USB port not plugged in.
### Version
…
prplz updated
1 month ago
-
### Versions
pcsc v2.3.0
ccid v1.6.1
### Platform
Linux Kernel v6.1.28
VIX TECHNOLOGY SECURE READER (USB)
### Issue
We have been using pcsc and ccid for a long time and has been wor…
-
I am using Numaker-etm-m487 evaluation board, and I get this.
```
> sudo openocd -f eclipse/OpenOCD/scripts/interface/nulink.cfg -f eclipse/OpenOCD/scripts/target/numicroM4.cfg
Open On-Chip Debug…
-
Is there a way currently to reset camera settings to default values, specifically for the Microsoft LifeCam 3000?
We have encountered that when setting camera settings via the loading or copying th…