-
How about USB MIDI support? If AppleWin could RX through an external MIDI interface, it would save me having to purchase an actual Apple IIgs. If it were possible, would it be limited only to MIDI dev…
-
I run two waveshare adapters on one raspberry pi and noticed that the assignment of the device address after a reboot is random. This is unfortunate as the assigned hardware might get swapped after a …
Phi2k updated
6 months ago
-
I have 2 x Solis 10.0 kW Dual MPPT (3F) . Their dataloggers (LAN) dont work. Now I am planning to buy two S3-WIFI-ST dataloggers.
And hopefully they will let me integrate the inverters into HA. So I …
-
On testing a program with a serial device, it was running fine with PL210x- and ftdi-USB-serial adapters plugged into the IOT, it failed with wrong received data on two CH34x-based adapters. Practical…
df5zx updated
3 years ago
-
### Is your feature request related to a problem? Please describe.
My board is Fysetc Spider 2.3, and I buy a wifi module(SPIDER-RRF-WIFI) for the board so that I can control by 3D printer with my la…
-
Hello fanoush,
I followed this repo for quite some time and now wanted to try it out myself.
I tried to flash the device (Mpow DS-D6 from gearbest, I have 3 units) with your espurino DFU file but …
-
Problem detail : http://www.raspberrypi.org/phpBB3/viewtopic.php?f=44&t=8010
I, like a few others, have been having various problems using USB/Serial adapters with RPi. One of them is the FTDI adapte…
-
### Summary
When I use `list_ports` to provide a list of serial ports to a user in linux, they are only shown ports directly under `/dev/*` (excluding sudirectories). This can result in multiple p…
-
I am trying to resolve a situation with udisks2 and inserting multiple USB disks with identical serial numbers. I am not using udev.
I have written my own daemon which creates a GDBusObjectManager…
-
Cannot seem to upload to esp8266 based devices that use a WinChipHead CH341/CH340 serial adapter using esptool.py. It works with other serial adapters. Bug in [uchcom](https://man.freebsd.org/cgi/man.…