-
### BMS Version 🔄
Seplos V2
### Connection Method 🌐
USB-RS485
### Pre-submission Checklist ✅
- [X] This issue is focused on a single problem (For multiple issues, create separate reports).
- [X] …
-
Thank you so much for your work!
I followed the instructions at https://ignavus.net/r36s and everything just worked!
I am now trying to use imgui instead of go-sdl to build by own application, and i…
-
As with telnet, is there a way to use the UART or the USB port for serial communications allowing for config changes.
-
# Summary of the problem:
The BMS-Pace software does not work over a stream server but does work when connected to the battery via a USB port from a HomeAssistant server.
# Environment:
H…
-
Copied from #197 ([comment](https://github.com/Serial-Studio/Serial-Studio/issues/197#issuecomment-2271045134)):
> I am receiving a spurious empty newline ~5% of the time that I do not experience i…
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have up…
-
- ESP32-C3
- esp-hosted-ng firmware + kernel linux driver
- sha: https://github.com/espressif/esp-hosted/commit/91b093365cc58214532b976dd8749f65523d1e6d
- configuration: WiFi SPI + BT HCI (H4)
H…
-
Thank you for this excellent hack. I'm trying a slightly different approach. Instead of altering any of the gimbal hardware, my plan is to use a brand new JDY-40 module and emulate the controller by w…
-
I don't know the details yet, but it spams `error -71` in dmesg. Will investigate with picoprobe later.
-
Thanks for your awesome post that [inspired me](https://blog.pwkf.org/2024/03/20/drive-ws2812-uart.html).
I managed to leverage a simple USB/TTL uart to drive the neopixels.
And I also extended …