-
## Issue Description ##
After launching CU and DU, I am trying to connect the UE, but as soon as the connection starts, a segmentation fault occurs
## Setup Details ##
[Specify details of the tes…
-
We need to create a HWM driver that can interact with the USRP B100 via Srinagesh's custom GNU Radio script. The driver must allow the radio to be configured, relay the radio data socket, and use a 't…
-
Hello, can suggest what are available hardware devices support killerbee
I have created zigbee network using Raspberry pi 4B and Raspbee II module, I wish to exploit zigbee network, trying for uni…
-
When I run `$ sudo make` I get the following output and error:
`$ sudo make
g++ -g -O3 -D INCLUDE_B210 -o scan.o -c -I ../target/include -std=gnu++11 scan.cpp
In file included from scan.cpp:17:0:
…
-
Hi all
When setting a new USRP_B210 device to do the real_time experiment.
There is a problem that the device is can be seen in the terminal but can not be find by the GNSS-SDR. Please see the pict…
-
**Note by mbr0wn: This seems to be a larger libunwind issue. Unclear yet when exactly it gets triggered.**
osmosdr_fft in my yet-to-be-pushed brach works ;)
```
lldb-10 python3 -- /opt/gr39/insta…
-
### Discussed in https://github.com/magma/magma/discussions/15452
Originally posted by **rajyay** July 9, 2024
Hi Community, Can someone help me to establish the internet connectivity for s…
-
CubicSDR seriously needs UHD support in linux. The UHD drivers are already supported for linux, when will cubicsdr accept them?
-
Hi, would you add support for the NI USRP-2920 SDR box?
Do you also plan a UI to configure and load GPS files?
-
I didn't find a solution that really worked
## Issue Description ##
I follow the srsRAN_Project file requirements, using USRP B200, based on
sudo./gnb -c gnb_zmq.yam
l directive want to be able…