-
## Viessmann E3 series ([One Base](https://www.viessmann.de/de/loesungen/intelligente-technologie/viessmann-one-base.html)).
Connect to devices like Vitocal 250, Vitocharge VX3 **via CAN bus**. Onl…
-
Moin zusammen,
ich bin neu hier, daher erstmal ein paar einleitende Sätze zu meinem Viessmann "Environment":
Meine Viessmann Anlage (Vitodens 333 WS3A mit Vitotronic 200 GG1) ist schon einige Jahr…
-
* Subject: Temperatur Raumanzeige ?
* Wiki-Page: v-control
* From: wikiwitt
* Date: Thu, 9 Dec 2010 10:09:18 UT
* Message-ID:
Hallo bei openv,
Habe folgendes Problem beim Betrieb mit v-control:
Di…
-
I am using a Vitodens 300-W (E3) and use automations in Home Assistant to set the temperature for the "reduced" program based on a schedule (or for program "normal" would make no difference, whatever …
-
Hi,
I have tried your Add-On.
But after configuration an start, the Add-On is stopped after a few seconds.
![1673024611](https://user-images.githubusercontent.com/13675579/211061303-747d1eec-…
-
What data point in vito.xml can be used to retrieve the Central heating ( main circuit ) return temperature?
I have a vitodens 200-W, device ID 20CB
Regards
Peter
-
Hallo Leute,
verstehe ich die Infos, die ich hier finde, wie folgt ungefähr richtig?
- Meine Vitodens 200 Typ WB2 aus 2000 / 2001 hat eine Optolink-Schnittstelle?
(siehe Bild unten und dieser L…
-
* Subject: Thermisches Problem mit Kesselkreisregelung
* Wiki-Page: home
* From: khambrecht
* Date: Sun, 10 Nov 2013 23:00:34 UT
* Message-ID:
Hallo zusammen,
etwas off topic, aber vielleicht kann…
-
Hi Stefan,
I am currently testing your Vitotronic Implementation for OpenHAB2 and it's great: Thanks for your work!
Yet I do have a problem: I use a Vitodens 300 gas burner controlled by a Vitotronic…
-
I'm using vcontrold for my vitodens 200 (w2b2). I was wondering if someone has a command to
1. delete the error messages
2. reset the device after an error appeared
My device id is 20CB // …