-
Hi,
I think I have detected an incompatibility between the AR488 and the Prologix adapter that seems to cause an issue with the KE5FX VNA toolbox.
The issue is with the ++spoll command. The KE5FX …
-
The PlutoSSR board (70mhz -6ghz) and the red pitaya SDR (0-60 mhz) share "similar" hardware architecture based on the Zyncq 7010.
The red pitaya and the PlutoSDR howebet uses different "front end"…
-
Many useful calibration algorithms are based on the 8-term Error Box model, such as the *Unknown Thru* calibration or the *TRL* calibration. If these algorithms can be applied to a 1.5-port VNA as wel…
-
My VNA, the Copper Mountain M5180, has qcodes parameters for each s-parameter, defined like
```
self.add_parameter(name='s11',
start=self.start(),
…
-
Hi,
NanoVNA-QT release 20200507 for macOS started to crash on any attempt to load calibration files, or apply calibration data. Previously worked just fine. Device is NanoVNA v2.2, firmware 2020050…
-
There are a few features from QCoDeS' experiment functions that I'd like to see in labcore.
1. Getting units, names, etc. for variables from instrument driver functions. For example, our M5180 VNA…
-
How can I prevent the signal DIO0 from being set to "1" when I connect the VNA program? This generates the PTT signal in my Transceiver and turns on the connected Power-Ampli. Only the bias current fl…
-
Maybe outside the scope of this project, but I'm asking anyway, because why not.
[vNAS](https://vnas.vatsim.net/) provides U.S. departures at uncontrolled airfields with a squawk code before depart…
-
It seems that the ZVA and ZNB firmware has a hard time handling segmented (frequency) sweeps where the number of segments is well beyond the normal range. At approximately 5000 segments, the firmware …
-
**Is your feature request related to a problem? Please describe.**
Segmentation viewing and export to PACS/VNAs outside of the integrated OHIF viewer and/or Slicer. In order to integrate inference pr…