-
Is it possible to add support for this waveshare display? It requires custom dtbo overlay files. https://www.waveshare.com/wiki/2.8inch_DPI_LCD
1. Is there a way to add them via the cli or portal?
…
-
# Problem
I tried using this lib for the waveshare 1.54 V2 this did not work
## Things I noticed
After some trying I noticed that when ever writing data image in 4 Pin mode the chip select is…
-
Related to #16
❌ https://www.digikey.com/en/products/detail/arduino/ASX00039/21443321
10x8cm, way too big!
![image](https://github.com/user-attachments/assets/35ed588b-36a2-4b6c-91f3-cce93a760f7…
-
**Describe the problem you have/What new integration you would like**
Add the Waveshare 3.7inch e-Paper e-Ink Display to the Waveshare integration.
**Please describe your use case for this int…
-
**Waveshare 13,3" error at new cycle**
The epd displays the modules at the first start, but it doesn't refresh, and when starts a new cycle it stops with error.
(venv) inky@inkycal:~/Inkycal …
-
Have anyone tried to get this working with an ESP32? In my case I have several ESP32-S3-Zero (https://www.waveshare.com/wiki/ESP32-S3-Zero) and trying to replace Wemos D1 Mini with those, but I am hav…
-
### The problem
Normal HA switches (e.g. for example, `input_boolean`) maintain their state across HA restarts (unless the `initial` parameter is set). This doesn't seem to be the case for switches c…
-
Hi, can you please add support for the waveshare mini.
URL: https://www.waveshare.com/esp32-s3-zero.htm
Thanks
-
**Describe the problem you have/What new integration you would like**
The Waveshare 7.5v2 supports partial refresh (as seen for example in this table):
![image](https://github.com/user-attachm…
-
I find the download_instructions button to be incredibly useful, so here is a list of all boards without the link enabled.
List requested by limor so we can backfill boards that already have good …