-
First off, this is an awesome project! We're going to try it with a Zephyr-based project.
Have you looked at supporting [WebUSB](https://wicg.github.io/webusb/), [Web Serial](https://wicg.github.io…
-
[Canable](https://canable.io/) is a serial to CAN firmware that allows a user to send and receive can messages on a can bus. A nice web tool to capture messages, configure the canable device as well r…
-
-
this project is so amazing but has a problem.i have a question can you add serial monitor in web interface? is possible? because people can't carry a laptop anywhere but can carry a phone with self an…
-
Por favor necesito ayuda urgente. Cuando tengo la web cam conectada al puerto usb no me abre el programa para duplicar el móvil pero si la desconecto si me deja, como puedo solucionarlo? por favor exp…
-
Hello, I have this kind of use case:
A web app accesses at least two functionally different devices on serial ports. For reference, it is a serial interface to transceiver control (CAT) and Arduino…
-
### What happened?
1. Performing Kubernetes Upgrade using kubespray.
2. A set of workers needs to be upgraded serially due to HA
3. Another set of workers can be done in batch "default:20%" would b…
-
### The problem
Cannot compile pipsolar (https://esphome.io/components/pipsolar.html)
### Which version of ESPHome has the issue?
2024.10.2
### What type of installation are you using?
Home Assis…
-
I'm trying to flash the firmware with the `idf.py flash` command. It gets part way through building, then has this error:
`/ArcticTracker-ESP32/main/system.h:32:1: error: unknown type name 'time_t'`…
-
I'm using https://github.com/shishu94/Klipperotchy/tree/main/tools/serial_moonraker_bridge
My setup: P3 Pro -> USB A to USB C cable -> Female USB C CH340E -> Male USB A CH340G -> RPi 4
Both USB t…