-
[Issue will only be an problem for 16M boards]
The linker file packages/esp8266/hardware/esp8266/3.1.2/tools/sdk/ld/eagle.flash.16m.ld is missing and is required for the Flash configuration 'FS:non…
-
### The problem
I am trying to install esphome on Wemos S2 S2 Mini board using board type: esp32-s2-saola-1
The process fails with error: Error: This board doesn't support arduino framework!
### …
-
Hello. I have succesfully uploaded your code to WEMOS D1 R32 board via Arduino IDE.
There was first setting via webbrowser where I choosed my home wifi. Serial monitor showed that board was connected…
-
### The problem
After receiving a command from the IR Climate component, the air conditioner disconnects from WiFi. Reconnection using the mobile app is required.
### Which version of ESPHome ha…
-
### The problem
Following the example within the ESPHome.io page `https://next.esphome.io/components/display/waveshare_epaper.html`
I've paired up a Waveshare ePaper 2.92 board version 2.1 to a Wemo…
-
Program Example8_SPO2 compiled successfully and got uploaded to Wemos D1 Mini.
Board I'm using MAX30102. Wire connection is as below:
WeMos D1 -> MAX30102
5V Vin
G Gnd
D1 …
-
My biggest problem with the original WEMOS D1 Mini or Node MCU was the poor WIFi signal.
Now I've found and tested this, with external antenna.
WEMOS D1 Mini Pro 4M 16M Bytes External Antenna Co…
-
### The problem
Compiling a firmware for wemos d1 mini (ESP8266) using the MQTT over SSL component (with ssl_fingerprints set in yaml configuration file) on dev Docker container version 2021.11.0-dev…
-
Hello.
First of all, thank you for your great job with this library.
I have been using this library on my project but now it throws a compilation error since v2.0.3:
```
In file included from .p…
-
Hi Stef,
Great work, i would love to ditch the ATMEGA 2560 and run this on a Wemos D1 mini.
Is this possible, and how to connect the RFLink board: https://www.nodo-shop.nl/nl/41-rflink-433-mhz t…