-
Hi,
I wanna connect my wemos d1 Mini to my Evse wb.
I have to connect tx (gpio5) and rx(gpio4)
Is gnd also needed ?
What’s are the differences between version 1.x.x and version 2.x?
Thanks for yo…
-
Hi, for a year i have been using many wemos d1 mini without problems with this library for home automation lights and i have never had problems. For a few weeks, however, I have been having trouble co…
-
### What happened?
After the upgrade to 14.1 WLED wasn't accessable anymore. Erasing the flash and flashing 14.0 solved the issue. Another upgrade to 14.1 resulted in broken wifi again. If you flash …
jclsn updated
3 weeks ago
-
Seems the genuine D1 mini pro is in short supply, so I had to buy a clone!
The problem is the clone uses CH340 for the USB to Serial whereas the original uses the CP2104. It also has no series resist…
mopac updated
9 months ago
-
I've had good success with your BLE libraries on these ESP32 boards: WEMOS LOLIN32 and MH-ET LIVE ESP32DevKit. But I'd like to use the WeMos D1 Mini board for some projects. These BLE libraries won'…
-
Testing the 07 Oct 2024 with success on a Heat Pump MSZ-SF35/50/VE2 with WEMOS D1 Mini.
We have bought new WEMOS to complete the installation with same model of Unit.
We have copy the self code, a…
-
Do you know if it is possible to use prgm button on wemos d1 mini?
-
# Programming the Wemos S2 Mini with Tasmota: An Easy Guide for ESP32-S2 Devices | Dialedin
Get the most out of your Wemos S2 mini by programming it with Tasmota. This ESP32-S2 based device features …
-
Hi,
I am using a Wemos D1 Mini Pro and a buck converter connected to the Gnd and + serial pins of the MG5050 alarm system. I have properly soldered the pins and checked the connections several time…
-
There is electrical humming sound coming from wemos D1 mini v2 module.
we are using 5v 3A power supply connected to 5v input pin. I suspect its the power input which cause sparking/humming sound. Al…