-
```
PS D:\> .\SNANDer-Windows-64bit.exe -i
SNANDer - Serial Nor/nAND/Eeprom programmeR v.1.7.5 by McMCC
Found programmer device: WinChipHead (WCH) - CH341A
Device revision is 3.0.4
spi_nand_pr…
-
Hello!
```
lsusb
[cut]
Bus 001 Device 028: ID 4348:55e0 WinChipHead
[cut]
```
```
./isp55e0
isp55e0: Device family 13 type 73 is not supported
```
What info can I provide you to add…
-
WCH-Link is a CMSIS-dap debugger made by WCH.
It can be found by Keil and OpenOCD when adding the command `cmsis_dap_vid_pid 0x1a86 0x8011`.
However, it cannot be found by PyOCD. When I run `py…
-
Hi
I am trying to run acm_terminal together with a Huawei USB modem. However, I am getting the following output in the serial window.
 by specifying the Arduino serial port /dev/cu.wchusbserialfa140 in Settings->Serial Co…
-
### Basic Infos
- [x] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [x] I have read the documentation at [readthedocs](https://arduin…
-
Just downloaded the latest Arduino IDE 1.6.5
Added the boards manager [tried with both staging and stable]
Downloaded SiLabsUSBDriverDisk and ch341ser_mac drivers.
Rebooted. I can see all the esp8266 …
-
Where do I find **working** drivers for OSX 10.10 (Yosemite)?
1. I have OSX `10.10.3` on `MBP11,2`
2. I downloaded OSX drivers from [the vendor website](https://www.silabs.com/products/mcu/Pages/USBto…