-
Please include the following information when submitting a bug report:
* The Pycom board you are using: WiPy 3.0
Not able to load "Devices" tab on pybytes. It gets stuck at the loading screen an…
-
Micropython does not support interrupts on UART, which is very weird since it is a very common protocol and always needed. ([link to the official documentations](https://docs.micropython.org/en/latest…
-
Connecting to an IPv6 network from python3 currently triggers the following error
```
File "/home/cefn/Documents/shrimping/git/medea/medea/https.py", line 18, in byteGeneratorFactory
s.conne…
-
Hi! I need to connect to MQTT via SSL/TLS.
When I try to connect to MQTT without SSL - allready is good. When I try to connect with ssl like this:
`client = MQTTClient(CONFIG['CLIENT_ID'], CON…
-
Reading https://docs.pycom.io/pycom_esp32/library/machine.Pin.html#machine.pin.init Pin.ALT has been removed I guess. Is it ```Pin.OPEN_DRAIN - input or output pin in open-drain mode.``` ?
-
We should set meta-interface for "network" module. Proposed points:
1. Constructor of classes in network module should accept only arguments related to hardware parameters. Good example is http://docs…
-
In https://docs.micropython.org/en/latest/wipy/tutorial/wlan.html, the connect() method reads
`wlan.connect(net.ssid, auth=(net.sec, 'mywifikey'), timeout=5000)`
In contrary, https://docs.microp…
-
GPS module needs integration but it has no spare UART connections.
Cellular and pollution sensor are using up both.
-
Hello, I've tried to execute the example of DeepSleep.
I followed this guide, trying to figure the obscure steps:
https://docs.pycom.io/chapter/datasheets/boards/deepsleep/api.html
First, I add…
-
I am using a WiPy 3.0 with the latest firmware 1.20.2.r6 and once I have ran some code with BLE characteristics advertised, it is impossible to change them. I even tried reflashing firmware and cleari…