-
Hi,
I was thinking about how to maximise the use of the limited four receiver resources in each KiWi, especially when not being used by remote listeners.
I note that the KiWi currently has the I…
G8JNJ updated
6 years ago
-
When compiling for ESP32-S2 I get fatal errors. I get the same errors with another microcontroller (M0), but it compiles successfully because they get treated as Warnings. (pasted below)
I suspect th…
kb4mg updated
2 months ago
-
Hi,
I would like WsprrPi to be launched at boot.
I tried to add the following sequence in /etc/rc.local, it crashes
`/usr/bin/sudo /usr/local/bin/wspr --repeat --offset --self-calibration MyCall …
-
In my own `build.lua` files I've taken to including the following lines:
```
local function tryrequire(m) -- from: https://stackoverflow.com/a/17878208
local ok, err = pcall(require, m)
if n…
-
Hi, it is a bit tricky to find how to typeset the hbar symbol ħ. It is apparently accessible under `planck.reduced` but coming from LaTeX one would much likely search for "hbar" in the symbol search. …
-
First off, I love this project! Great work!
This is a feature request to consider standardizing protocols or making wsprnet/habhub aware of Orion's protocol. (or at least have orion use the O or Q …
-
I built the single band wspr beacon with an arduino uno + SI5351 + Ublox neo7M + 1602A display.
According to "More WSPR magic! 20m, 200mW &12,000 miles".
Everything works fine after calibration acco…
-
use 1 connection to upload all the findings
-
First It’s a great Project and has some unique aspects, and the use of accurate sub frequency is a real game changer, so many thanks for the project.
The project has some very interesting uses and …
-
The basis of Richard Godfrey approach is: If an aircraft passes through the propagation path between a TX station and RX station, there will be an abnormally in SNR and Signal drift(Hz/second). If thi…