-
**Describe the bug**
Table adif_modes contains lots of duplicate modes
**To Reproduce**
Add QSO, open dropdown for mode, see lots of duplicates
**Expected behaviour**
fewer modes with distinc…
DL2CC updated
11 months ago
-
I am 100' from my WSPR beacon, which is getting over 700 spots per day.
The instructions beautifully built the rtlsdr_wsprd
GQRX loudly hears both my WSPR beacon and the pico-cw-beacon in my at…
-
I am using FreeDATA with Ft897D and Pulse audio device.
When I transmit (Beacon, CQ or simply Tune test) I am unable to lower ALC level without lowering power level.
Same behavior using pavucontro…
-
Hi Pavel,
Thanks for creating this software for the Red Pitaya SDR. I have been using the FT8 transceiver to receive signals on multiple bands. Is there a way to use the device to transmit? Ideall…
-
Hi,
If integrated with a WSPR beacon to form a transceiver a control line acting as a PTT is needed, it is required to turn own an amplifier but, more important, to switch the antenna from the rtl-…
-
I've been trying and trying to create a CMakeLists.txt file that will allow a current version of ESP-IDF (v5.0) to compile this project, but have had no luck. However, I really have very little idea …
-
Hello Guenael,
My log shows quite a fewl entries like this
"Spot : -19.11 2.33 28.125194 0 A000AA 63"
As a very beginner in C programming I searched the source and found this in "wsprd_utils.…
-
I updated the new V3 and Also the new release of Radio Sync which has the soundcard option
However, I cannot get the Soundcard option to Work, or even act like it is active (notice no GREEN indicat…
-
![image](https://user-images.githubusercontent.com/1651042/145086730-779171b0-9da0-47b6-920b-111a387b57c3.png)
It seems to be running a cycle of 3 or 4 minutes.
-
Hi,
First of all thanks for this amazing project! I'm glad to see the new release supports uploading spots to WSPRnet!
**Describe the bug**
The first and last 2 minute intervals are not decoded…