-
Just looking at the bug reports here and in the OpenWRT defects repository, it is clear that for various mt76 chipsets the TX power is simply not working.
I myself am experimenting two issues with …
dmsza updated
3 months ago
-
**Describe the bug**
Network connectivity drops out at random on CM3 with a custom carrier board with LAN9512. Device becomes completely unreachable over any network going through that chip (e.g. Eth…
-
I'm making a macro keypad using the CH55xDuino and a simple board that has a ch552 chip.
I don't know if this could help anyone but i think that this would make a great addition to the example for …
-
前些日子拉了联通家宽送了台VS010,几乎一样的硬件参数让我萌生了想移植的想法。遂对ax3000的dts进行修改试图适配vs010。
使用[ipq50xx-mainline-kernel-5.15-openwrt-23.05](https://github.com/hzyitc/openwrt-redmi-ax3000/tree/ipq50xx-mainline-kernel-5.15-open…
-
Using a TP-Link Archer C20 v4 with MT7610E I have installed kmod-mt76x0e which doesn't come by default and it detects the 5Ghz card. Configuring it it works to connect but a few minutes after booting …
-
I would like to see support for mt8168 added.
If there is anything I can do to help, I will. Thank you very much.
-
Laser switch button is just blank and does not switch to laser mode, but does make a sound when pressed.
-
Hi @mhennerich @tfcollins
I have a similar problem to the one in this thread. When i tried to use an external GPS clock with 40MHz output, and injected it to the pluto's CLK_IN and changed the xo…
-
As I really need a backup from a "virgin" Pluto Plus v2 I am writing this article in hopes someone is so kind to provide the files, thank you! (PS: It will also help you in case something goes wrong a…
-
I'm trying dev odoo with apple silicon
ghost updated
5 months ago