-
### Before posting
Please follow the steps below and check the boxes with [x] once you did the step.
- [x] I checked the issue tracker for similar issues
- [x] I checked the [changelog](https:/…
-
Hi,
I'm not sure it's a good idea to ask questions about MMM here, but I've got a problem setting up the printer, and have no idea where to even start with the debugging.
If I understand the manual c…
-
-
```
This may be similar to other posts.
Would be nice to limit the height of all the protection. This is really
important, at least for my and my server. This means to have a optional limit
(in the…
-
I generate gcode in python and print it. gcodeview seems to have a bug dealing with sparse moves (moves with not all axes specified) across the layer boundary.
For example:
``` gcode
G1 X70.000 E64.…
-
Hello, I successfully compiled your caffe-ssd, but it prompted me the error during create lmdb file by cread_data.sh:
sherlock@Y50-70:~/Downloads/myproject$ ./create_data.sh
root directory ok
…
-
**Application version**
latest
**Platform**
Linux mint
**Printer**
S5
**Reproduction steps**
1. slice
2. save toolpaths
3. load model and quickly delete it (workaround for another bug w…
-
On the X1 the g-code used to unload the filament when manually switching filaments makes a mess when run from a cold nozzle.
The toolhead moves to the cutting position while heating the nozzle.
T…
-
bool Printer::startProbing does a coordinate test, which triggered for me:
GCode::fatalError(PSTR("Could not activate z-probe offset due to coordinate constraints - result is inaccurate!"));
…
-
https://github.com/repetier/Repetier-Firmware/blob/76ef4223d71d00bdb6ba02f1e1e810d9069754c1/src/ArduinoAVR/Repetier/Commands.cpp#L1010
Hello,
I changed my axis to floats and therefore I had to c…