-
### Question
I am trying to make a working zigbee end device using a ESP32-C6 Dev module and Arduino IDE.
I found the Arduino example from here:
https://github.com/P-R-O-C-H-Y/arduino-esp32/blob/Zi…
-
Bonjour
J'ai un RM3250ZB et j'ai remarqué que le quirks n'est pas appliqué, car il y a le cluster 0x0002 dans la signature comparativement au code dans switch.py.
Voici la signature:
```json
{…
-
zigpy's (new) radio API support unified commands for Zigbee network backup and network restore; will [zigpy-zboss](https://github.com/kardia-as/zigpy-zboss) support this?
* https://github.com/zigpy…
Hedda updated
1 month ago
-
Since 2024.06, I've noticed that all my ZigBee devices frequently disconnect (about every 8 hours). After approximately 10-20 seconds, the devices reconnect.
However, if I disable the ZHA toolkit, …
-
### The problem
I'm using ZHA to control an [Aqara H1 double rocker with neutral](https://www.aqara.com/en/product/smart-wall-switch-h1-eu-with-neutral/), namely, WS-EUK04. One of the triggers is c…
-
- [ ] re-pair all sensors
- [ ] check automations
- [x] master door
- [ ] back door
- [ ] weather dashboards
teich updated
4 years ago
-
### Related area
Zigbee , ZHA
### Hardware specification
esp32-c6 , esp32-h2
### Is your feature request related to a problem?
this is not problem related.
### Describe the solution you'd like
…
-
### The problem
ZHA integration has only one decimal place of temperature. But sensors sends two decimal point data.
### What version of Home Assistant Core has the issue?
all
### What was the las…
-
Ok So I updated the firmware(Z-Stack-firmware 460800bps mod) but I must be doing something wrong.
Read me says
SLZB-06
CC1352P2_CC2652P_other_coordinator_*.zip
After CC2652P firmware update set…
-
Hello,
I flashed my LYWSD03MMC hw2.0 using an UART. After that, I reset the device and I could configure it using the ZHA integration. ZHA read received data first time, but after that there have b…