-
Would it be possible to implement simple RX/TX switching with single button? Kind of "HackRF One Transceiver plugin", where could be also possibility to check mark "RX_freq = TX_freq" for sink and sou…
ly2ss updated
5 years ago
-
[qn_cfg.txt](https://github.com/n7tae/QnetGateway/files/2660589/qn_cfg.txt)
Hi everyone, I'm trying to setup my icom repeater but there is something wrong.
I use armbian orange pi zero:
- Lin…
-
If there is a transponder downlink signal near the beacon frequency, FoxTelem can get fooled and lock onto the passband signal rather than the beacon signal. (@ac2cz has a photo of this).
Thought…
-
Com os mesmos dados eu faço uma simulação no site dos correios e da um valor. Mas na loja utilizando o Plugin, retorna um valor bem superior.
Medidas da embalagem (C x L x A): 44cm x 24cm x 10cm
P…
-
Relacionado con #66 , cuando recableemos las impresoras seguramente nos hagan falta cables más largos.
He encontrado los siguientes cables en grupos de 3 y 4, que vienen ya cortados y crimpados:
…
-
Many times I log QSOs made after SAT[ellite] QSO(s) as SAT as the SAT data is not cleared. The SAT data is entered into a TAB not normally visible so it's not till after logging a QSO is it noticed, w…
m1bxf updated
5 years ago
-
https://github.com/markqvist/RNode_Firmware/blob/cec3cda7c9c4a065cb5a6d728bd530faa50802a5/RNode_Firmware.ino#L502
First line was OK, but 2nd and 3th line always return FALSE, because:
status & SIG…
-
Hi
Well, it is getting very frustrating and annoying lately with the Zigbee-Adpater and/or the Zigbee-Stick. Randomly it just stops working at all. I tried different sticks and re-flashed all of th…
-
ev3dev version: 4.14.61-ev3dev-2.2.2-ev3
ev3dev-lang-python version:
ii python3-ev3dev 1.2.0 all Python language bindings for ev3dev
ii python3-ev3dev2 2.0.0~beta1 all Python language bindings for …
-
### Description of the setup:
* Device: Hamlab / Stemlab sdr
* SD card image:
* Application: Hpsdr / hamlabsdr
* Other relevant information:
### Description of the problem:
I'm usin…