-
In my initial design of this board, I wanted to use an external DS18B20 temperature sensor (either the little chip package or a waterproof probe) for more accuracy and better placement (the RP2040 chi…
-
The readings I am receiving from the load cell through the ADS1256 fluctuate around 0.5lbs. This causes the motor to oscillate when trying to hold a constant pressure on the pressure. I have mitigated…
-
Hello, developers at InMobi,
While using your SDK, I've observed that even when there are no ad plays or calls, a thread named "ConfigBootstrapHandle" continues to occupy a considerable portion of …
-
![image](https://github.com/tgstation/tgstation/assets/95130227/3875620b-e10a-43ca-b498-955cb8f63068)
Our stockmarket code between both skyrat and us is untouched and fully up to date with the latest…
-
Reported by: **[ywwg](https://github.com/ywwg)**
Date: 2022-01-19T03:14:22Z
Status: New
Importance: Undecided
Launchpad Issue: [lp1958321](https://bugs.launchpad.net/bugs/1958321)
Attachments: [bad va…
-
Where;
# `SoftDebtCeiling`
`SoftDebtCeiling` can be exceeded by debt whereby the debt is above the `SoftDebtCeiling`. Once the `SoftDebtCeiling` is reached, more debt can be issued but only adhering…
-
It's been noticed that the non-C0G capacitor (C33) in the frontend offset filter is very sensitive to thermal fluctuations. This leads to fluctuation of the feedback setpoint and thus causes large, lo…
-
Hi
Trying to model a T-motor quad-rotor blade, I have encountered problems when the wind is blowing through the back of the blade.
The problem is that the thrust goes to negative values suddenly aft…
mah92 updated
2 years ago
-
chat gpt: https://chatgpt.com/c/670d825c-5b44-8008-af85-dac1ffbaae92
R&D: training and prediction flow
- [x] research on picking look back period within same day for all window size
- [x] revisit nom…
-
Please add this crypto value viewer!!!