-
Hi,
I'm very new with esp32 and esp-idf and I try to learn how to use it.
The, at the first try with your code, I've got the following
```
-- Configuring done
-- Generating done
-- Build f…
-
Hi all,
I got IDF v5.2 (master) & [LVGL 8.3.7](https://github.com/lvgl/lvgl/commit/2b56e04205481daa6575bd5f7ab5df59d11676eb) to compile.
See https://github.com/hiruna/lvgl_esp32_drivers/tree/dev…
-
U-Boot SPL 2016.09-rc1 (Oct 01 2016 - 21:31:35)
init i2c
rand test 0 MB RW, err cnt = 0
DRAM: 512 MiB ~
CPU: 1008000000Hz, AXI/AHB/APB: 3/2/2
sunxi_board_init ok!
Trying to boot from MMC1
mmc_dev=0
…
-
## Environment:
macOS Monterey 12.1, Homebrew
## Device
[LilyGO TTGO T-Camera ESP32-WROVER](https://makeradvisor.com/esp32-ttgo-t-camera-pir-sensor-oled/)
## menuconfig:
```
[*] Use SSD1306 …
-
We used pi-gen to build an image for a CM3 and it works since a long time.
Now we are doing first steps with CM4. We were able to generate an image with pi-gen and Bullseye for CM4.
We tried if th…
-
### Target name(s)
ESP32_REV0, ESP32_REV3
### Firmware version
_No response_
### Was working before? On which version?
_No response_
### Device capabilities
System Information
HAL build info: …
-
[996/1642] Building C object esp-idf/78__esp-opus/CMakeFiles/__idf_78__esp-opus.dir/src/repacketizer.c.obj
D:/download/Esp32-xiaozhi/code/xiaozhi-esp32-0.3.1/managed_components/78__esp-opus/src/repac…
-
English: I have tried to use the RFID-Sensor for NXT from Generation Robots. But at the moment it will not be found. Link to the Vendor-Shop at the End.
---
German: Ich habe versucht den RFID Senso…
-
with "make bl" I get compiler warnings with the linker:
arm-none-eabi-g++ obj_f1/DMRDMOTX.o obj_f1/IOSTM.o obj_f1/DMRTX.o obj_f1/POCSAGTX.o obj_f1/SerialArduino.o obj_f1/MMDVM_HS.o obj_f1/SerialPort.…
dl1bz updated
5 years ago
-
Hello, I'm trying to build a wifi to eth bridge using a WT32-eth01 module. I used the wifi-router example as a template.
I managed to configure the BLE provisioning. I can connect to my local wifi…