-
Have noticed that the initial boot programs are running when the device is waking up from deepsleep. After some digging I noticed the following in the logs:
```rst:0x5 (DEEPSLEEP_RESET),boot:0x13 (S…
-
When we have tested with longer simulation periods (e.g. 1 year), we have had some issues with the docker container crashing with OME errors (exit code 137).
When running docker on windows (through W…
-
Hi Guys, let me say that this porting on ESPHome looks great!
I'm testing it on a custom board based on ESP32 and works fine but looking at the logs at boot I'm finding a differente value for the st…
-
Until recently I was using the ESS with a regular Arduino Uno, where it was working fine, but I've moved to an Arduino MKR 1010 and I'm communicating with the ESS via the I2C expansion pins.
Using …
-
Hallo Stephan,
habe jetzt meine Platine V1.2 aufgebaut und sie funktioniert soweit. Nachdem ich einen defekten SGP30 getauscht habe
laufen auch die Messwerte ein. Die Werte vom BME680 sind nicht g…
-
I am setting up a new Arduino ESP32 Feather board with BME680 sensor. The sample sketches I tried are working, and I have started to adapt the sample code.
My code compiles fine, but crashes with …
-
I can confirm this code working with BME680 bought from Mouser on a custom board with ATMEGA328P without external crystal using I2C. Arduino IDE 1.8.3
The only value Im not sure this library correc…
hecko updated
4 years ago
-
I currently have a NodeMCU connected to a PMS5003 sensor reading PM1, PM2.5, PM10, Temperature and Humidity values over UART.
https://how2electronics.com/iot-air-quality-monitoring-esp8266/#Share_S…
-
Hello,
I need to use the iAQCore chip with I2C that require Clock Stretching https://www.i2c-bus.org/clock-stretching/(https://ams.com/documents/20143/36005/iAQ-core_DS000334_1-00.pdf).
It seems t…
-
Hi Stan,
I was curious to ask if a openLeadr VTN script could run on a Heroku...? I also apologize not a aiohttp expert or heroku or web development, we are just doing some demand response research…