-
Under Camera Controls - Motion Detection is enabled and under Manage > Motion Detection the following options are set:
![image](https://user-images.githubusercontent.com/13489208/41061722-d6635274-…
-
Hi All,
I've installed latest custom fw on my wyze v2 cam a week ago. The start was very promising. i've got 1600x900 rtsp h264, integration with synology, camera in home assistant and mqtt switche…
-
Hi,
I have successfully flashed (I believe so anyway, as the version in the log is now much lower than what I originally had!). The issue is, after flashing and loading the sd card, I cannot get th…
-
hi all:
I use ubuntu 18.04 comolie source code failed!!
this is output message, please help me how to solve it ...
----
> ====== making target debian/stamp/conf/minimal_debian [new prereqs: ]==…
-
I have 3 Xiaofang 1S camera's, all flashed with 2018-12-29. I am running these at 1280x720 VBR and 10fps. I am only using video, disabled audio and all other services (although motion somehow keeps st…
-
**Please note we will close your issue without comment if you delete, do not read or do not fill out the issue checklist below and provide ALL the requested information. If you repeatedly fail to use …
-
Hi,
Loving the Xiaomi Cams and especially your hack that allows to use them so much more/better.
I am using a Xiaomi Xiaofang 1S and I am streaming it to MotionEyeOS. It worked all well through …
-
Here's what i just done with my brand new *Xiaofang** S1* ::
1. Flash cfw with hack, xiaofang/cfw-1.0.bin and after that successfully execute sdcard run.sh
2. modify run.sh to correct load wlan dri…
-
@EliasKotlyar,
Is it working fine with this branch ? On Wyse Camera?
I have some troubles making working again the movement detection (maybe the API changed a bit with the latest libs)
We definitel…
-
I've been playing with the libimp samples and am wondering what the origin of the libimp binary .so files are (in the uclibc folder). I assume this is a library offered by the vendor to do the video …