-
I am a newcomer to the RTOS world and I am learning how to use NuttX.
I am following some introductory articles to Nuttx written by Alan C. Assis (You can see [here](https://www.embeddedrelated.com…
-
# Problem with ArduinoOTA Firmware Updates on Pico W
I'm running into an issue with firmware updates. Here's what's going on:
I'm using ArduinoOTA for updates, and I've also got LittleFS in the for …
-
On Micropython 1.20 if you start a thread on Core1, even if that thread does nothing then when an IRQ is triggered from the rotary encoder on code running on Core0 the whole machine locks up e.g
o…
-
Hi,
I'm currently writing my third book around MicroPython (in French) and each time I'm getting trouble to setup the WebRepl deamon on the WiFi microcontroler.
The reason for this is simple... the …
-
(Explain how this peripheral could potentially be used in the car)
- [ ] Propose an interface of functions (Do a quick design review w/ other firmware/application engineers)
- [ ] Implement functi…
-
Hi, I ran into a forum post where you said you had examples of homekit running in micropython and that it worked on the pico pi w? Do you know where those files are?
-
Uses different hardware so will need to use different embassy modules.
add a feature for "pico"
Change the hardware description returned accordingly.
-
Hello, tang is most useful as a small, dedicated, energy efficient device. Arduino fits very well. Any chances tang can be compiled for it?
Also good alternatives would be [Raspberry Pi Pico W](htt…
-
### Port, board and/or hardware
Pico 2 / RP2350
### MicroPython version
MicroPython v1.24.0-preview.201.g269a0e0e1 on 2024-08-09; Raspberry Pi Pico2 with RP2350
### Reproduction
1. Install latest…
-
Values greater than approx. 100 ms are unreliable for connectable unidirected advertisements, ex. 150 ms equals more likely to 800 ms, 1280 ms - 6500 ms (with high variations). Non-connectable unidire…