-
I am using an SX1276 transceiver module. I understand that the pin mapping is meant for SX1272, but why does it does not reflect the actual mapping on the raspberry pi?
![image](https://user-images…
-
Hello,
I meet an issue and hope you can help 😊, thank you to read me.
I can’t generate te fbcp-ili9341 driver for my Whaveshare 3.2C display.
i follow instructions to generate it , but
the scri…
-
When I used Rasbian Buster with Rpi4 issue #483 occcurs. I have to use an old Rasbian Jessie. But the Rpi 4 doesn't support Jessie. As a result, I have to use Rpi 3 instead of 4.
Yesterday, I teste…
-
``` python
>>> sound = SoundLoader.load('sound.wav')
>>> sound.play()
>>> sound.play()
```
The first play plays the sound, but it then doesn't enter 'stop' state when it finishes and the second play …
-
Hello H,
Many thanks for this project. I was looking for exactly this for my Casio watch since I moved countries.
It built fine and appears to run but generates very low frequencies on my RPi mode…
-
It's possible they're all past their shelf life? But unlikely in the case of all 3 RTC's, from 2 different vendors?
What should I test to further evaluate?
ASIDE: the OS (Raspbian 2017-11-29) r…
holta updated
8 months ago
-
Having some issues with getting a RAW14 capable MIPI sensor working in Libcamera. The driver is currently under development such that it is possible there are issues on that end, but also looking at s…
-
So far I have found the following HATs which use GPIO 23 which is not brought out on the PiSquare. You may want to mention them in the documentation.
Some are unsuitable for the PiSquare (e.g. audi…
-
So I am using RPI2DMD clock and I am messing around with the config and I see they are using looks like rpi-rgb-led-matrix to power it. I have built 3 different clocks and a few other projects around …
-
Temperature cube working in simple algorithm:
1. Get temperature from sensor
2. Send temperature value via RF24
3. Sleep device for 5 minuts using pwrDownMode
4. GOTO step 1
When device is sl…