-
Just wondering if there's any reason why this premade board wouldn't work.
Aliexpress US $18.31 | LILYGO® TTGO ESP32-Paxcounter LoRa32 V2.1 1.6 Version 433/868/915MHZ LoRa ESP-32 OLED 0.96 Inch SD Ca…
-
Has anyone manage to get the SD card library working with this (https://github.com/LilyGO/TTGO-LORA32-V2.0) board. Or is there any other library that you guys can recommend.
-
Hi @plerup great work on this makefile!
I've noticed this issue for a while, thought I'd finally post an issue because I didn't see one that specifically addressed it.
If I name my main sketch …
-
## Description
It was decided during the Virtual Maintainers Assembly 2020.05 to continue with the next phases of the Kconfig migration. This means that Kconfig will be used to model all module’s c…
-
Just leaving the phone connected to the t-beam results in it loosing connection.
The app is ver 0.1.2
board is running 0.1.0
Close to the end of the logfile there is
03-08 16:12:57.329 42…
-
- [x ] **PlatformIO Core**.
### Configuration
**Operating system**:
Linux Mint
**PlatformIO Version**
PlatformIO, version 4.1.0
### Description of problem
LDF add ESPAsyncTCP **…
-
Hello,
The "esp32" example is working fine in the US915 band, even with normal downlink messages, but every time I try to send one "confirmed downlink message" through the TTN console, I got a core p…
-
I've been struggling with a bit of an enigma of my own. I can't seem to get a message sent successfully after I initialize the node. The gateway joins my wifi network okay:
> *WM: Adding parameter
…
-
Hello, could you share the electronics schematics?
I’m building the electronics based on a raspberry zero and that would come handy.
Thanks!
-
**Describe the bug**
alpha5 cannot see any of the preinstalled boards that are visible in alpha4
**To Reproduce**
1. run alpha5
2. check installed boards
**Expected behavior**
All preinstall…