-
Is it possible to add more outputs for specific alarms:
ie) gpio x goes active high when the voltage is out of tolerance
or gpio y goes active high when High Temp Alarm
etc etc
-
I've got a 7030 (HW v1.06, FW v1.19) with a Evolution controller that incorrectly reports a state of Cooling Down while running in an outage. It's the only one I have seen do that.
It does briefly …
-
Nexus - Air Cooled - 14kW
Log from genmon.log
`2017-11-29 19:13:16,771 : Validation Error: Error parsing command string in ParseExerciseString: setexercise=sunday,09:00,weekly
2017-11-29 19:13:1…
-
Generac 5870, Air Cooled, Nexus Controller
Thank you for a great appl;ication. I have everything working which I can verify through the ClientInterface.py. I can not seem, however, to get anythin…
-
I believe that the male Molex plug listed in the readme is incorrect, at least for my application. (2013 22KW Nexus controller liquid cooled) . The part number listed (WM3603-DN) does not appear as …
-
Cannot find specifics on where this connects on the Evolution controller. Any screen shots of the molex connection to the controller... thanks
-
As a first time PI user.. I am very confused as to what is needed to make this work.
I have the PI setup and installed
I cloned the repository and configured the conf files and moved them to the etc…
-
i tried running `brew doctor` and `brew install` as described below but this did not yield any solutions.
raw output below:
$ brew install thrift
==> Downloading http://www.apache.org/dist/incubator…
-
To reproduce:
Add a site that is secured with Basic HTTP Auth. You will be prompted to enter credentials when you add the site to the app.
Once added, tap to view the site's details screen (the list…