-
I have one with "ZJ-WFMN-A V1.1" printed on it which according to https://github.com/arendst/Sonoff-Tasmota/wiki/MagicHome-with-ESP8285 is a version with the ESP8285.
Is this supported by any of t…
-
**Take a look at the wiki and FAQ, perhaps your question is already answered!**
[FAQ](https://github.com/Aircoookie/WLED/wiki/FAQ)
**### Hi Aircoookie!
when i was found this wonderful and amazing s…
-
Hi,
I have the following error in notifications:
![image](https://user-images.githubusercontent.com/6305045/91906623-2b6aaf80-ecb1-11ea-9a1f-542140905542.png)
The installation is fresh.
```
…
-
Hi !
I would like to build a lamp with just mere dimmable white and color effects.
So the white would need it's own channel.
With a Meanwell LED driver that would just be any pin, which could gi…
-
### PROBLEM DESCRIPTION
Hello, I have a problem with the DevGroupSend-Command. If I try to send for example the following command: DevGroupSend 193=AnyCmd the receiving device reboots sometimes.
…
-
Hello,
i've got the Sunix RGBWWCW Led Controller (looks similar to the AriLux AL-LC06 PWM LED) and flashed it sucessfull with your Firmware, configured it first as this led controller in the WebUI …
-
MagicHome LED, updating from 3.0.0, tried many times. Updating stops and device boots normally on 3.0.0
logs:
```
Advanced ESP Logger (c) 2020 José Antonio Jiménez Campos
0006.841 192.168.1.…
ptath updated
4 years ago
-
I have 2 v4 magichome bulbs, and 1 v6 magichome bulb. They all used to hang on light.brightness = [value], but the last update fixed the problem for the v4 bulbs. The bulb's brightness changes, but my…
-
**Question**
I am using a MagicHome 2.0 LED controller and replaced its firmware with ESPURNA 1.14.1 firmware, built with VS Code and flashed OTA.
Similar to issue #680, I needed to switch red and…
-
**Describe The Bug:**
Viewing cameras outside the VLAN fails. Worked a day ago.
**To Reproduce:**
Open homekit on a device outside the VLAN.
**Expected behavior:**
I have several cameras…