-
We ran long duration ping to ssh port 22 for 12 hours, we sent 1 packet/second.
Noticed 1.6% packets loss, ssh port is intermittently going up & down.
Version info
ID="openbmc-phosphor"
NAME="Ph…
-
I tested openbmc using latest auto-build image:
https://openpower.xyz/job/openbmc-build/distro=ubuntu,target=palmetto/lastBuild/artifact/images/palmetto/
The openbmc version is:
```
root@palme…
-
Pour M6 quelques videos ne fonctionnent pas (Par exemple NCSI), on a pourtant le lien m3u8 ...
Peut être qu'il faut s'authentifier comme sur le site 6play.
Recherche en cours
-
We don’t have any captive portal logic for Android or Windows (phone/desktop) so I’m expecting that we’re still trapped inside the captive portal browsers (I don’t have devices to test, though)
The…
-
Was doing a normal code update and had the serial console up. Not sure what code level was on the system prior but this is what I get in serial, even after a PDU cycle.
Probably not much we can do…
-
With the 4.7.x kernel, the PGOOD sensor for both Palmetto and Barreleye seems "stuck" on. Even if we AC cycle the box, when we get up to BMC_READY state the GPIO value appears on.
```
root@palmetto:…
-
```
[ 3.290000] ftgmac100 1e660000.ethernet eth0: NCSI interface up
[ 3.290000] Unable to handle kernel paging request at virtual address 12005456
[ 3.290000] pgd = cb890000
[ 3.290000…
-
In code update, warm reset is triggered to prepared the system before code update. At present we have wait time of 5 minutes for system to become pingable after warm reset. In Palmetto, system is taki…
-
`Post update booting ... the update hung at login prompt`
https://openpower.xyz/job/openbmc-build/301/
Changes
Git (git https://github.com/openbmc/openbmc.git)
meta-obmc-machines: Witherspoon ker…
-
### Problem Description
I wrote a PowerVM driver for the embedded Broadcom 5720 on a Barreleye system. The 5720 has both ports configured for BMC NC-SI passthrough. I am attempting to ping with the…