-
### Feedback
The [alert](https://alerts.home-assistant.io/#tplink.markdown) linked to from the tplink integration docs states:
> TP-Link's latest firmware for Kasa Smart Home devices closes the po…
-
It would be great to get power consumption support for the Xiaomi SP-EUC01
Currently, only Switch and Temperature are exposed: https://z2m.dev/devices/xiaomi/sp-euc01.html
The device exposes swi…
-
## Version of the custom_component
ha-tplink-deco v0.0.1
running on a pi 4b with armv7
home assistant version: core-2022.2.0.dev20220118
Installation Type | Home Assistant Container
Python Versio…
-
### The problem
With the 2021.10.0, only 5 of my 28 TP-Link Kasa HS105 & HS200 devices can be connected. The HS110's are all found.
I'm reverting back to 2021.9.7 until this can be resolved.
### …
-
**Describe Your Problem:**
Cannot get this plug in to boot up or run at all.
**Logs:**
```
Show the Homebridge logs here, remove any sensitive information.
```
**Plugin Config:**
`…
-
**The problem**
After upgrading to 2021.02, all my 50 switches are "unavailable" now!
I tried reloading the integration and also restarted home assistant and also core, but it did not work.
Als…
-
Loving this so far!!
(using ~18 RGB + tunable white bulbs)
Setting the bulb to say, green will change the bulb to green, and then using the white slider will change the bulb to a given white temp, b…
-
### The problem
When trying to set a color_temp greater than 400 with and less than or equal to 500 the error below is shown (i had set it to 450). This is a TP Link Kasa Bulb
`websocket_api scrip…
-
### The problem
While following the the instructions at https://www.home-assistant.io/integrations/steamist/, Home Assistant returns "Failed to connect" error in the UI after submitting my steamist…
-
### Describe Your Problem
SwitchBot devices no longer appear in Homebridge. Everything works fine through the iOS App. The SwitchBot plugin was working fine and several Meters and Motion sensors we…