-
### Describe the bug
The ESP23-S3 boards - I've checked several to be sure - will not flash with ESPresense despite flashing with the similar online flasher for Tasmota. The chip seems to erase and…
-
{"model":"DVA3221","version":"7.2.0-64561","jun":"1","lkm":"dev","maxlanport":"7","internalportcfg":"0xffff","netif_num":"2","vid":"0x46f4","pid":"0x0001","addons":"acpid2,misc","modules":"8139cp,acpi…
-
Hi,
Can I acquire data from serial port?
I have a PCB board that uses the Intan RHD 2132 chip. The board has 32 channels and a sampling rate of 1000 samples per a second, so it returns 32 data point…
-
Someone opened a case in openwrt for this issue but i think its firmware related problem and better here.
```
[ 10.127699] mt7986-wmac 18000000.wmac: HW/SW Version: 0x8a108a10, Build Time: 20220…
-
Since the PocketSDR cannot be readily found assembled, I am trying to see if I can get the proposed code to work with a single MAX2771 as found on the evaluation board
https://www.analog.com/en/resou…
-
I'm now able to start the kernel boot process from USB, but the boot halts when trying to locate the rootfs. I have the bootargs set to `rootfs=/dev/sda`, but that doesnt seem to work. See the u-boot…
-
Hello,
I installed Karabiner today and am really liking it. One think that I have noticed is that the delete key on my keyboard doesn't work when using karabiner, even with an empty profile. If I u…
-
HW info:
- Holtek HT32F52352 (Cortex-M0+)
- Macroblock MBI5042GP LED Driver
- GigaDevice 25Q40CT 4Mbit SPI Flash
Tasks:
- [ ] Add photos
- [ ] Add schematic
- [ ] Write firmware patch
- …
-
I have a TTGO T-beam supreme but I cannot get a sketch working. After uploading it always displays:
ESP-ROM:esp32s3-20210327
Build:Mar 27 2021
rst:0x15 (USB_UART_CHIP_RESET),boot:0x8 (SPI_FAST_FLAS…
-
I'm using espflash master to flash a esp-idf-* (master) project with espflash to a esp32c6.
```
espflash flash --monitor
[2024-01-22T08:43:49Z INFO ] Serial port: '/dev/ttyACM0'
[2024-01-22T08:…
t-moe updated
2 months ago