-
```
What steps will reproduce the problem?
1. Program two arduinos (coordinator and router) with ZB examples from the
library (receive and send).
2. Let them to associate themselves.
3. Look serial m…
-
I have On/Off connected to A14 on Artemis Nano (AD35). It seems to turn the modem off and on, and holds the voltage low. But when the whole board powers down it seems to return to floating voltage.. t…
-
```
What steps will reproduce the problem?
1. Turn cube on
2. Wait (mttf 10min)
We believe that changing the baud rate on the serial connection may fix the
problem.
```
Original issue reported on c…
-
```
What steps will reproduce the problem?
1. Program two arduinos (coordinator and router) with ZB examples from the
library (receive and send).
2. Let them to associate themselves.
3. Look serial m…
-
Hi all,
I'm totally new to the topic of domotics and have not a lot of electronics experience apart from some tests with Arduinos.
On the search for a lamp for my living room that I could contr…
-
### Board
xiao esp 32 s3
### Device Description
the usual module
### Hardware Configuration
![Снимок экрана 2024-02-05 225720](https://github.com/espressif/arduino-esp32/assets/159071246/0f386b8…
-
Consider shipping a flatpak as well for linux users :)
I might try to do that as a PR if i can't get the original tool work through wine/proton
-
#### **Historia**
*Dado* que hay un respirador conectado.
*Cuando* cuando se reciba una trama de datos.
*Entonces* queremos que no haya posibilidad de fallo debido a que se usan versiones distintas…
-
Here are the following sections that need to be added or updated on the documentation website.
- [ ] Drive by Wire
- [ ] Steering hardware setup
- [ ] Braking hardware setup
- [ ] A…
-
Da die Software genau das macht, was ich für meine Heidelberg-Box suche, hatte ich kurzerhand die Teile bestellt. Nun stelle ich fest, dass ich leider keine Ahnung habe, wie ich dem ESP32 die Firmware…