-
Hello! Sorry for my English... I'm Korean.
First of all, Thank you so much!
So many Korean people whose hobbies are collecting retro IBM-PC are glad to meet your project!
(I'm vice manager of …
-
The Model 30 drives are 1.44MB, 34 pin with 5V and 12V on pins 3 and 6 of the ribbon cable respectively. People have successfully had goteks with the stock firmware running on these systems in place …
drdpj updated
4 years ago
-
I am trying to use OpenFlops/FlashFloppy to emulate an Altair 8" Floppy.
I created an `IMG.CFG` file and loaded a CP/M disk image `CPM.ALTAIR8.IMG` on the USB drive. What I am getting is an Error 3…
-
I have tried to image same Atari ST disk with 7 different drives:
SONY MFP-F11W-5DU (SONY8903)
SONY MFP-F11W-U0 (SONY9002)
TEAC FD-235HF A110-U5 (TEAC0302)
ALPS DF354H090F (ALPS0324)
NEC FD1231H …
-
I have to ask how you came up with the name for this project, I've googled it but no obvious answers, sorry if it's been mentioned before but I've seen nothing that explains it.
-
DENSel on Pin 2 of the floppy cable is an input for 5.25" drives and can be configured as input or output on some 3.5" drives.
In the schematics for the F7_11 model DENSel is marked as an input (lik…
-
Hi,
I just build the Greaseweazel board and used an adapter board for this. Flashing the software was no problem and the device gets recognized on my Windows 10 system. I also can read and write disk…
-
I have sourced a couple of the STM32 Bluepill's from different sources and they have all failed the 2Hz Blinky test. All have communicated correctly at 115200 baud and seem to function in all other re…
-
Hi!
I would like to ask whether there is any chance that your firmware might work with [my custom board design](https://github.com/roybaer/usb_floppy_adapter) from early 2018.
It uses the same S…
-
With one of my bluepill's, I have this, I haven't debugged it properly yet