-
### Hardware:
Board: WeMos LOLIN V1.0.0
Core Installation/update date: 11/jul/2017 (https://github.com/espressif/arduino-esp32)
IDE name: ?Arduino IDE? ?Platform.io? ?IDF component?…
-
I am trying to use Wemos/Lolin D1 mini as Modbus slave to offer the master 4 registers. Is there a way to achieve this without having to use a MAX485 and by directly attaching the bus to a Pin of the …
-
Hi Robert,
In regards to your PM, I'm posting the same question I also posted on the domoticaforum.eu here.
For original post: [https://www.domoticaforum.eu/viewtopic.php?f=75&t=13381&sid=132eba…
-
EDIT: 07/03/2018: My understanding of the issue has improved since I opened it. I think that the extension should fill the intellisense config file on the fly based on the board being selected by the …
-
I will continue to look for and post a solution.
I am having the same exact issues described as resets constantly in the Testing section of the tutorial. Following the "**Setup Display & Buttons…
-
**Describe the issue**
Just 2 of 9 active WLED devices discovered in Hue Essentials App.
**Steps you tried**
1. Connect diyhue emulator to Hue Essentials App (working)
2. Search for lamps
3. 2 …
-
the amazon link you include in the readme is for a product that has no stock and may not get any more. also they seem to be a ripoff of the actual d1 mini. looking for alternatives i found several pro…
-
Hi there,
I came across this repo today and couldn't wait to build. I used a Lolin D1 Mini Pro and a NPN photo Transistor I had laying around. Hooked everything up with 1k pullup as shown here on a …
-
добрый день.
Сразу хочу поблагодарить автора за такой крутой проект.
Собрал данный проект на прошивке GyverPanelWiFi-12 от 07.12.21. схема собрана по (DEVICE_VARIANT == 0), в папке проекта со схема…
-
Hello,
I am attempting to get the airRohr firmware working a Lolin/Wemos D1 Mini. It appears to load fine (using latest.bin) and I can configure sensors. The problem is reading temperature/humidi…