-
I'm very pleased to have built my first ATCwatch.ino.zip and it works!
There was only one hurdle, that was my Linux (Ubuntu 20.04.3 LTS with Lambdastack) has no i386 support. This manifests as 'b…
-
### IDE and version or firmware
framework = arduino, platform = espressif32, board = dfrobot_firebeetle2_esp32s3
### Operating System
Windows 10
### Description
Adding simple wifi conne…
-
### LVGL version
v9.1.1-dev
### What happened?
I'm trying to play a lottie animation from the example. It works fine if the size is 64, when I increase it to 96, it freezes. I'm using ESP-IDF 5.1.4…
-
mesh网络节点74个,向服务器下载固件过程或在向子节点分发固件过程时,主节点重启,打印显示OTA任务触发任务看门狗,该如何解决这个问题呢? 另外,问下MDF能开启双核吗,为什么MDF menuconfig中没有开启双核的选项
-
Recently, the ST7701 RGB screen seems to be favored by various hardware manufacturers. Therefore, I think it's necessary to specifically test the ST7701 and provide an example. Below is the ST7701 tes…
-
```
import task_handler
th = task_handler.TaskHandler()
```
Must be run or LVGL will not start.
But when I use _thread module it will cause system crash
Here is the simple test code:
```
# Ini…
-
i built a firmware for ESP32 GENERIC S3 (ESP32-S3-WROOM-1)
python3 make.py esp32 submodules clean mpy_cross BOARD=ESP32_GENERIC_S3 DISPLAY=ili9488 INDEV=xpt2046
by using this command.
binary file c…
-
Fresh build, following directions.
Any idea why my ESP32-S3 stays in DFU? I cannot seem to get it to actually boot this image - it boots the stock micropython image well enough. Chip I have is ES…
-
Used in WT32-SC01
Needed for: https://github.com/letscontrolit/ESPEasy/issues/3831
From the datasheet:
> EM20918 is a low-power I2C interface 2 in1 module includes Long-Distance Proximity Senso…
-
Thank you very much for this work.
I notice that during display update (that is quite long : ~5 seconds), touchscreen events are not working.
Do you think it is due to it8951e driver ?
Or the …