-
Hello,
I see that doing this kind of loop, the free heap decreases **if** an internet loss occurs in the ssl handshake step.
After a few disconnections, this ends up in a device that can never aga…
-
### Basic Infos
- [X] This issue complies with the [issue POLICY doc](https://github.com/esp8266/Arduino/blob/master/POLICY.md).
- [X] I have read the documentation at [readthedocs](https://arduin…
-
The image is valid, but `lwip` can't understand it. Where should we start debugging?
-
## Description
Hello everybody. Did somebody port open62541 to use it with the FreeRTOS TCP/IP Stack instead of the lwIP Stack? I tried to do it myself but I have problems with some function, for exa…
-
**Describe the Problem**
When an AP is connected using the MXCHIP chip, the log shows that the AP has been successfully connected, but the IP address has not been obtained correctly.
**Host**
- H…
-
### Is your feature request related to a problem?
IoT devices are often connected to the internet via LTE routers. However, the MTU seems to be significantly reduced via LTE, which means that in some…
-
```
What steps will reproduce the problem?
1. 在LWIP中设置IP地址为本地机器的IP地址(192.168.1.151)
2. 启动程序
3. 输入对应的网卡编号,显示listening on...
4.
在局域网内的其他机器上访问我的80端口,可以正常显示网页
,但不能在自己的机器上访问。同时本机还会掉线,QQ也不能
登陆。系统托盘提示IP地址冲突…
-
Hi,
there seem to be some files missing in the RTOS version of the SDK: https://github.com/espressif/esp_iot_rtos_sdk
It would be nice, if you could fix this, so that the AT+ app could be compiled us…
-
The socket API is missing a function to find out the last error that happened to a socket.
if you don't have an "errno" mechanism in your system, this might be a good alternative to find out what spec…
-
**Problem:** Often, when using the RFFE for continuous testing during a few days, it becomes unresponsive and we cannot communicate with it. Ping works, but our custom protocol based on BSMP does not …