-
Hi,
I updated sACNView earlier today when prompted, and found that I was unable to listen on 127.0.0.1, which I had been able to previously. Is this something that I should be able to do?
I've b…
-
Although I define universes to listen to in the constructor of `Receiver`, `Receiver.on("packet", ...)` is called for all received universes.
Is this expected behaviour?
-
Request by email from @Vampir8
The resolution is set n U-Boot and that does not work -> http://u-boot.10912.n7.nabble.com/SUNXI-CONFIG-VIDEO-SUNXI-is-never-set-td360711.html
I would need to chec…
-
Hello, thank you for your work and outstanding contributions! The code can currently only try on the SMPL, can it be extended to the one shown in Figure 1 of the paper, can you try on the personalized…
-
Scans fast on HUAWEI
-
Hey Arjan,
I've been thinking about wireless :)
I see the esp8266 code, for RPI, but trying to work it out for the Zero... is this implemented yet?
I saw these pinouts.... What is the pinout…
-
Hi, since sACN and ArtNet are different standards that both rely on UDP, it would be possible to have a single firmware for both the standards having a setting to choose the one to use?
I ask this …
mrv96 updated
4 years ago
-
This is a follow-up for #103
- [x] lib-artnet -> https://github.com/vanvught/rpidmx512/blob/master/lib-artnet/src/artnetparams.cpp
- [x] lib-artnet -> https://github.com/vanvught/rpidmx512/blob/m…
-
Hello again.
We have created our first board that replicates your board's features (and adds RS-485, optional half-duplex comms, and GPIO inputs). I am trying to program the board.
It is not cle…
-
Hi,
thanks for the code. I noticed that in your paper, you represent the results of DistMult + W-GCN in Table 4. But these results are not seen in the paper of W-GCN. I wonder where the results come…