-
Hi:
I'm debugging the confirmed msg, when i USE_BAND_470 , seems like class A node can't recieve ACK, it re-sent packet for 8 times, but from base station web page ack was sent. when i USE_…
-
Hi,
We have a risinghf gateway in which we are using version 2.0 ./lora_pkt_fwd. We have two end nodes , One was given by risinghf along with the gateway in which we are receiving the frame. On the S…
-
Hi, Is there a SX1301_FPGA_200K_NOTCH_LBT_SPECTRAL_SCAN_863_v33.hex corresponding to the CN470 file?
-
Bridge version=2.1.0
Bridge Log#####
```
INFO[0000] backend: connecting to mqtt broker server=tcp://127.0.0.1:1883
INFO[0000] gateway: starting gateway udp listener addr=0.0.0.0:17…
-
Hello, i am using raspberry 3 v. B with the ic880a concentrator. I set everything as it is suggested and the gateway receives packets normally. However, as I observed after some time (maybe one day) t…
-
Hi, I have a problem ,
when I use one node to test downlink ACK PER, everything works fine(PER about 1.5%), But when I use two or more nodes to test ,I found some problem(PER about 20-30%), Here is…
-
This is a **bug report** for **the packet forwarder**.
The packet forwarder is not receiving RF messages set to SF8BW500.
We have a mote that is sending join messages (OTA) only on SF8BW500 and th…
-
In the EU version as a test I've centered Radio_1 on 869.5MHz in the gateway. This produces frequencies of 869.1/3/5/7/9. All of these frequencies lie within an allowed ETSI band.
When I receive th…
-
Hi brocaar I have been trying to Configure the LORA environment as mentioned in https://docs.loraserver.io/install/quick-install/ ,Its been really handy as of now.I did encounter a few errors while i …
-
Hello,
I am wondering if there are some reference design documents for lora-gateway with sx1301?
Thanks!
laoqr updated
7 years ago