-
z80asm should predefine a macro to allow the code to ```IF``` around a block depending on the processor.
I'm thinking about defining ```__CPU_Z80__```, ```__CPU_Z80_ZXN__```, ```__CPU_Z180__```, ``…
-
Extending from #50 and #276
Looking at the memory model for the [z80](https://github.com/z88dk/z88dk/blob/master/libsrc/_DEVELOPMENT/target/crt_memory_model_z80.inc) and [z180](https://github.com/z…
-
The project website has a section "Notes on SDCC". It mentions a few issues:
1 Directly connected sequences of 'addw x,#' and 'subw x,#' should be combined into one operation.
2 Multiplication by …
-
Merge #282 discovered the necessity to initialized the IL register in the crt rather than the z180 page zero.
-
Hello all. I'm trying to compile from the latest sources to the Mark4 N8VEM SBC, just to try the compilation process. The final goal is to take this as a template for my board, which was pulled out of…
cocus updated
6 years ago
-
Defines created in `config_*.m4` chain properly for one reference, but don't chain for the second reference. This also causes the rest of the second file to be incorrectly read.
The [`config.m4`](h…
-
Greetings,
I am using the SDCC-toolchain 2.0.5 in MPLABx 4.01 for PIC16F1826. When I set the memory views in MPLAB X. The following is generated:
*****
// PIC16F1826 Configuration Bit Settings
…
-
If I've a C function definition that passes one or multiple `uint8_t` to an asm function, how is it (are they) represented on the stack? Is a single byte pushed onto the stack for each `char`?
Is t…
-
```
Arduino.mk Configuration:
- [AUTODETECTED] CURRENT_OS = MAC
- [USER] ARDUINO_DIR = /Users/k/Documents/sduino/sduino
- [USER] ARDMK_DIR = /Users/k/Downloads/…
-
After running make I get this:
```
CC main.c
CC display.c
CC uart.c
CC eeprom.c
CC outputs.c
CC config.c
CC fixedpoint.c
CC parse.c
CC adc.c
LINK b3603.ihx
Code is too large, it is 8570 by…