-
Would it be possible to implement MQTT Discovery for Home Assistant instead of relying on the YAML here? I've seen this done with Solar Assistant and it's very clean.
Let me know if you need more …
-
It is unknown to NR if the heishamon is connected to the pump. Is the connection
This is nice to see in the log.
-
Hi!! I found some entities of this component with the device_class set to 'running'.
I think this kind of device class is designed for process or threads that can being executing or not (running o…
-
Difficulty of this issue is to solve correctly the two options to control room temperature: "compensation curve" and "direct mode". This is especially complex because we can only detect at runtime (wh…
-
Hello,
I'm just installed a fresh HeishaMon from tindie, and it works great.
But how can I turn off Setup Wifi? has no password and keeps on after the configuration.
thank you.
-
Hello,
i ordered a heishamon PCB and 5m cable from tindie. I wabt to usw heishamon parallel to cz-taw1.
I soldered the connector for cn-nmode in the cable.
Heishamon works in single Mode, w…
-
Hello,
heishamon does not show any values anymore.
It was working when I firstly installed the device.
I tried to restart the heishamon and also tried to unplug/replug the cable from heishamon but …
-
The temperatures of the WAR for high and low temperature is reversed.
My heat curve is 30 at -15 an 25 at 13 degrees. But if I look into WAR it shows me 30 at 13 an 25 at -15 degrees.
Consequently t…
-
I get a warning in homeassistant that manual configured mqtt sensors have a changed format.
See https://www.home-assistant.io/integrations/sensor.mqtt/#new_format.
**old:**
sensor:
- platform:…
-
He Hoi...
Ik he nog steeds je nodered flow voor de heishamon ..
Had wat vragen er is wat veranderd...
kunnen we ergens contacten