-
If I run the pitft helper to enable the pitft on my RPi Zero W, after reboot the screen works correctly but WiFi no longer works.
-
First off, thanks for putting this together.
I've got things working with a raspberry pi 3 and the PiTFT Plus 480x320 resistive touch screen (2441 model, same as yours), but I'm having issues with …
-
I'm getting ready to reimage and start again for the third time now... I can't figure out what is happening.
pi3
pitft 3.5"
creative webcam
robo3d R1
First few boots works great. I set everyt…
-
The Adafruit PiTFT 2.8 Capacitive touchscreen uses this driver for touch responses. I can confirm it works with 4.9..28+ on the Pi Zero W. This driver replaces the ft6236 (which also works :). And …
-
I'm working on [retro handheld project](http://bitfixgaming.boards.net/post/4168/thread) using rpi3 + retropie + pitft 2.8" + fbtft. Most of the time I expect to use the system in handheld mode via pi…
-
Hi there..,
Just got a new RPI3 the other day, trying to install RetroPie (current from github) on top of stock Raspbian image (downloaded on May 31, 2016). While attempting to install libboost1.55-d…
-
Hi @dlech,
I would like to know how to play a video on PiStorms using the Screen and Using the HDMI output from the raspberry Pi. Is it possible?
Cheers
Juan Antonio
-
Hi,
Is it possible to have a filechoosericonview not scrollable?
I use it on a raspberry pi with a pitft resistive touchscreen, and when I want to select a file the resistive screen scroll the view …
-
any chance you can fix the alignment issues with the DHCP line along with ( ) i tried to mimic the screenshot you have on the main page but i couldn't figure it out
![image 003](https://cloud.git…
ghost updated
7 years ago
-
I was following some instructions to run ts_test as part of the configuration of a PiTFT module from Adafruit as described here...
https://learn.adafruit.com/adafruit-pitft-3-dot-5-touch-screen-for-ra…