-
I just set up a brand new ratgdo, using the web installer and then adopted into esphome in Home Assistant. I'm seeing the logs in esphome spamming with "Collision detected, waiting to send packet", re…
-
I wanted to provide feedback on three GDOs that I've installed.
The first has a [050DCTWF](https://www.chamberlain.com/receiver-logic-board-dc-wifi/p/050DCTWF) logic board, and this works well two …
-
Hi, I am having an issue when I attempt to complete the Adopt of the esphome-ratgdo device to an Esphome yaml config. I get a number of errors and the device config is not adopted. I've attached the l…
-
An ESP Home user reported that their door was being unintentionally activated [See here](https://github.com/PaulWieland/ratgdo/issues/212). They happened to notice that the dry contact input was the c…
-
I am using a 2.5 board with V2.56 firmware with a sec +1 GDO and an LM889 panel running MQTT firmware.
The "open" command is working like a toggle when used in an HA automation. Assuming the door i…
-
My gdo doesn’t have a motion sensor on it, so it is useless for me and just clutters up the home app.
Would be great to have a way to opt out of this, either just ifdef’ing it out and offering two…
-
I assume changes will be needed to support the v2.5 hardware? If so, any timeline for that? Thank you
-
[link in readme](https://github.com/ratgdo/mqtt-ratgdo/blob/449a8a42eccf18a17a63d93c9dac859571c5ef2b/README.md?plain=1#L12-L13), don't take me to a valid place to purchase the board separate.
-
This is what I followed --
the black wire leads to R on the remote (confirmed)
in the next p…
-
### The problem
This issue existed prior to the update to 10.2, but 10.2 was supposed to fix the problem and appears to have done so for others. I did not apply any of the patches mentioned in the p…