-
I use raspberry pi and SX1301AP2-PCB_E336, I have use raspberry pi pins MOSI , MISO , SCLK , CE0 and CE1 . CE0 choice SX1301 , and CE1 choice FPGA. When I start getway and module,getway can receive Jo…
-
The default setting of the GPIO pins from the SX1301 is to allow the AGC MCU to have complete control.
https://github.com/Lora-net/lora_gateway/blob/ddc5e5079ad76c42935f6a5d382194022984f77d/libloragw…
-
Hello,
I'm trying to figure out how to configure manual ADR "Set channels" of a node using US frequency subband 2. The channels are:
Index Frequency DR Max Min On
0 903900000 3 …
-
Please share the gateway config file for multitech gateway.
The file that i am using is shown below:
`{
"SX1301_conf": {
"lorawan_public": true,
"clksrc": 1,
"lbt_c…
-
So I have a microchip RN2903 device that is able to join using abp and I am able to view the packets sent up to the server. Problem I am having is the device tries to OTAA join and it seems like the s…
-
I have iC880A connected to my device. I am running packet-forwarder on it. I have an external GPS connected via usb to my device and I have added "gps_tty_path" to local_conf.json. Packet-forwarder co…
-
The lgw_rxrf_setconf call for radio_1 will fail and cause the packet forwarder to crash if radio_1 is set to disabled.
INFO: radio 1 disabled
ERROR: NOT A VALID RADIO TYPE
ERROR: invalid configur…
-
Hi,
I want to adapt library to work in Single-channel gateway mode. It is necessary to collect a cheap gateway based on SX127X modules for testing and debugging. Is it even possible to do this on t…
-
I would like to know, the latest version of the gateway connection diagram? Sx1301 how to connect with raspberry's SPI ? FPGA how to start? After the operation of the gateway, prompted FPGA did not st…
-
I have a raspi + ic880a (SPI) gateway (4 of them) , running a rasbian lite (jessie). I have also created a json for each of them and created them in the repository. I have created an interface board, …