-
I found and fixed #601 (tbeam draws too much current) but there are valid cases where someone may want a faster (or slower) charge rate for the onboard battery.
Allow rate for axp battery to be con…
-
**Describe the bug**
SerialPlugin does not respond when UI screen goes to sleep / device goes into lower power mode.
**To Reproduce**
Found on TBeam v1.1
RX/TX pins:
#define RXD2 35
#define TX…
-
@gereic is there a kick start guide on the Kobo interface ? curious as I have one spare and would like to hook it up, happy to do a write up on this to help others if I could have a bit of direction o…
-
> Coming back to this again after quite a bit of testing, I have now managed to identify a somewhat more reproducible way of causing resets on T-beams v1.0 over the air.
A single node running 1.2.3…
-
I had my tbeam connected via USB to my bench power supply with the battery at 95% and noticed that it draws nearly 1A from the port. This is outside the USB spec. If we stuck to the spec, we shouldn't…
-
**NOTE**
I'm opening this ticket with the intent of closing it right away (probably) since I've found the solution and may help someone else in the future who finds this.
While connected to my co…
-
Hello everyone,
I am trying to do AFSK with my T-Beam. I am using the RadioLib to do so. Unfortunately I am only getting an unmodulated carrier. I already posted a similar question on the RadioLib'…
-
**Describe the bug**
Map on the Android App only shows my node and no others. I have cleared cache, data and force stopped the app then reconnected my node but still no dice. i also tried making sure…
-
One of my new TBEAMs (node id 0x1c) has an interesting problem:
After any transmit it gets stuck printing this:
Can not send yet, busyTx
The root cause (confirmed with logic analyzer is some s…
-
Many boards (in particular TBEAMs) don't have a 32khz xtal. Therefore they are just using an RC clock for timekeeping and that drifts pretty fast.
So the time of day clock (not millis() though) sh…