-
The home page says:
> Insert each SD card into each Raspberry Pi and boot them up.
But they doesn't assign automatically that which one is going to be TX and which one is RX. They're both bootin…
-
hi, have wifibroadcast process packet out or order case ?
-
hi, can i tell me how to distinguish which is fec packet(redundant) and which is media packet in wifibroadcast?
redundant packet should not push to deocder from what i know.
-
I understand that in AP mode, the minstrel_ht (or the Atheros one) rate selection algorithm will change the rate/modulation dynamically based on the STA RSSI. But in monitor/injection mode, why should…
-
I've recently tried to upgrade the firmware to the one from the latest Raspbian image (2017-04-10). Now the system doesn't boot anymore. It doesn't even initialize the display, HDMI monitor shows "no …
-
hello I would like to setup EZ WB in Orange pi zero single board computer but there is no clear instruction for that could you please write one for us non raspberry pi users so it could be a univ…
-
following the instructions on https://dev.px4.io/en/qgc/video_streaming_wifi_broadcast.html i cant seem to get the build successful.
I got an error about sodium.h so i installed libsodium-dev but …
ghost updated
7 years ago
-
The channel 13 of the Internal Raspberry Pi 3 Wifi Card is not usable.
-
Using 1.06 on a fresh image, using "wifi-setup" does not seem to work correctly? Maybe I am doing something wrong but if i look into /etc/network/interfaces i see wlan0 and wman0 both have my networks…
ghost updated
7 years ago
-
TL;DR: USB bulk data gets intermittently dropped on Pi 2B + kernel 4.9. The
same hardware with kernel 4.4 does not drop data; this is a regression between
raspberrypi-kernel 1.20170405-1 and 1.20170…